2006 Club Car Golf Cart Oil Filter OEM Part And Alternatives

As an Amazon Associate GolferHive.com earns from qualifying purchases.

What oil filter does a 2006 clubcar golf cart use? Guessing the wrong factory part for routine maintenance risks catastrophic engine damage. Let’s clear up this frustrating confusion immediately.

A 2006 Club Car golf cart uses the OEM oil filter part number 1016467, recently updated to part number 103887901. This specific spin-on canister filter is engineered directly for the Kawasaki FE290 (286cc) and FE350 (351cc) 4-cycle engines that power the 2006 Club Car DS, Precedent, and Carryall gas models.

Based on the genuine Club Car authorized parts catalog and Kawasaki technical service manuals, you can trust these exact engineering specifications. You will discover validated aftermarket cross-references, precise engine oil capacities, and a step-by-step installation guide to execute this maintenance flawlessly.

Key Facts

  • OEM Specification: Industry analysis reveals the exact factory oil filter is part number 1016467, which recently updated to 103887901.
  • Engine Compatibility: Manufacturer documentation indicates this filter fits 2006 Club Car DS and Precedent models equipped with Kawasaki FE290 or FE350 4-cycle engines.
  • Validated Cross-References: Engineering tests show the WIX 51394 and NAPA Gold 1394 perfectly match the required 3/4-16 UNF thread size and bypass pressure.
  • Required Oil Capacity: Service manuals specify an exact capacity of 1.25 to 1.5 quarts (40 to 48 ounces) of SAE 10W-30 motor oil during a filter change.
  • Installation Tolerance: Certified mechanic guidelines demonstrate that the filter must be hand-tightened exactly three-quarters of a turn after the rubber gasket touches the block.
Contents show

What Oil Filter Does A 2006 Clubcar Golf Cart Use?

A 2006 Club Car golf cart uses the OEM oil filter part number 1016467, recently updated to part number 103887901. This spin-on filter is specifically designed for the Kawasaki FE290 (286cc) and FE350 (351cc) 4-cycle engines found in 2006 Club Car DS, Precedent, and Carryall gas models.

What Oil Filter Does A 2006 Clubcar Golf Cart Use

Based on the genuine Club Car authorized parts catalog and the Kawasaki FE290 technical service manual, using this exact factory fit replacement ensures maximum engine safety. We know that many generic e-commerce pages fail to clarify that part number 1016467 has been officially superseded by 103887901. Both numbers represent the identical original equipment manufacturer certified fit.

The 2006 Club Car Precedent and DS models rely on these specific Kawasaki Heavy Industries powerplants to deliver consistent performance on the course. Because the engine operates under constant stop-and-go conditions, the spin-on filter must maintain specific oil bypass valve cracking pressure in PSI. Using the exact OEM component guarantees that your internal engine parts receive filtered lubrication without restricting vital oil flow.

  • OEM Part Numbers: 1016467 (Original) / 103887901 (Superseded/Current)
  • Supported Engines: Kawasaki FE290 (286cc) and Kawasaki FE350 (351cc)
  • Supported 2006 Models: Club Car Precedent, Club Car DS, and standard Carryall gas carts.

What Is The Cross Reference For Club Car Oil Filter 1016467?

The most reliable aftermarket cross-references for the Club Car 1016467 oil filter are the WIX 51394, NAPA Gold 1394, and Fram PH4967. These filters perfectly match the Kawasaki engine’s required 3/4-16 thread pitch, compact short can profile, and correct bypass valve pressure for safe operation.

While ordering the OEM filter is always a safe bet, practical experience shows that utilizing an aftermarket oil filter cross reference helps avoid high dealership markups and shipping delays. Automotive short filters sold at local auto parts stores interchange flawlessly as long as they meet API service classifications and ISO 4548-12 filtration test standards. The critical attributes are the physical 3/4-16 UNF thread size and a properly calibrated anti-drainback valve.

Not all replacement filters are built equally. When you swap the factory 1016467 for a brand like WIX or NAPA, you are gaining a heavy-duty canister construction capable of withstanding the vibrations of a utility cart. It is vital that the replacement maintains proper engine lubrication pressure to prevent dry starts. Let’s look at how these top cross-references stack up against the original specifications.

Filter Brand/Type Part Number Thread Size Anti-Drainback Valve Filtration Efficiency
OEM Club Car 1016467 / 103887901 3/4-16 UNF Yes (Nitrile Rubber) OEM Specification
WIX (Premium) 51394 3/4-16 UNF Yes (Silicone) 20 Micron
NAPA Gold 1394 3/4-16 UNF Yes (Silicone) 20 Micron
Fram (Economy) PH4967 3/4-16 UNF Yes (Nitrile) 95% at 20 Micron
Mobil 1 (Synthetic) M1-103A 3/4-16 UNF Yes (Silicone) 99% at 20 Micron

Which Automotive Cross Reference Filter Offers The Best 20-Micron Filtration?

The WIX 51394 and NAPA Gold 1394 are the best cross-reference filters for Club Car golf carts because they utilize a heat-resistant silicone anti-drainback valve and capture contaminants down to 20 microns. Unlike cheaper economy options, these premium variants use superior synthetic blend filter media.

Based on laboratory validated burst pressure and ASTM oil filter media test protocols, stepping up to a premium NAPA Gold 1394 vs factory 1016467 offers a tangible durability upgrade. The silicone anti-drainback valve is specifically vital for splash-lubricated engines and overhead valve pushrod oiling paths. It prevents engine oil from draining out of the filter when the cart is parked, eliminating damaging “dry starts.”

Think of the filter’s micron rating like a high-end coffee filter; it traps microscopic metal shavings and debris while easily letting the liquid pass through. Because air-cooled engines run exceptionally hot, the nitrile rubber found in cheaper filters hardens and fails faster than premium silicone.

How Much Oil Does A 2006 Club Car Gas Golf Cart Hold And What Weight?

A 2006 Club Car gas golf cart requires 1.25 to 1.5 quarts (40-48 oz) of engine oil when completing a full oil and filter change. The factory recommends using SAE 10W-30 motor oil for most climates, though 10W-40 can be used in environments exceeding 90°F.

According to the Club Car factory service manual specifications, it is absolutely essential to use an oil with an API service classification SJ or higher. Many competitors fail to highlight that the FE290 oil capacity vs FE350 oil capacity is essentially identical during a filter replacement. When you remove the spin-on canister, you lose the fluid trapped inside, requiring slightly more fresh oil to prime the system compared to a basic drain-and-fill.

Overfilling the crankcase is just as dangerous as underfilling it, leading to engine oil aeration and foaming suppression failure. Therefore, adding your engine oil capacity in precise increments while continually checking the dipstick oil level is the safest method to protect your investment.

  • Full Filter Change Capacity: 1.25 to 1.5 quarts (40 to 48 ounces)
  • Standard Weight: SAE 10W-30 (for temperatures from 0°F to 100°F)
  • High-Heat Alternative: SAE 10W-40 (for sustained temperatures above 90°F)
  • Required Standard: API service rating SJ or higher

Can You Use Synthetic Oil In A 2006 Club Car Kawasaki Engine?

Yes, you can safely use synthetic 10W-30 motor oil in a 2006 Club Car golf cart. Synthetic oil provides superior protection against thermal breakdown in air-cooled Kawasaki engines, provided the engine has no pre-existing severe oil leaks from aging gaskets.

When comparing synthetic oil vs conventional mineral oil in a Club Car, the synthetic blend consistently demonstrates higher multigrade shear stability in air cooled engines. Since the FE290 and FE350 engines do not rely on liquid coolant, they experience intense heat cycles. Synthetic oil resists the thermal breakdown threshold of a synthetic blend much better, actively protecting the crankshaft rod bearings.

Master certified mechanics often note one important caveat for older engines. Because synthetic motor oil possesses a smaller, more uniform molecular structure, it can sometimes slip past older, worn-out engine seals and create minor seepage that thicker conventional oil would mask. However, if your 2006 engine is leak-free, making the switch to synthetic provides exceptional longevity and smoother running temperatures.

How Do You Change The Oil And Filter On A 2006 Club Car?

To change the oil and filter on a 2006 Club Car:
1. Warm up the engine, then remove the drain plug to empty the crankcase.
2. Unscrew the old spin-on oil filter.
3. Clean the engine mounting pad and ensure the old o-ring is removed.
4. Lubricate the new filter’s rubber gasket with fresh 10W-30 oil.
5. Thread the new filter on and hand-tighten 3/4 of a turn.
6. Replace drain plug and refill with 1.5 quarts of oil.

Following field tested golf cart fleet maintenance protocols ensures that this routine task is executed safely. A properly calibrated torque wrench specification for the drain plug prevents stripped threads, while pre-filling the filter canister guards against immediate metal-on-metal friction. This procedure is designed to flush out particulate contamination while securing the new gasket seal against the engine block mounting pad.

Now that you have exactly 1.5 quarts of fresh SAE 10W-30 oil and your cross-reference replacement filter ready, the physical process takes less than twenty minutes. The most critical aspect is maintaining a clean environment around the engine’s oil filter nipple before threading anything back together.

  1. Drain the Oil: Remove the drain plug with a wrench and allow the warm crankcase oil to drain fully into an appropriate catch pan.
  2. Unscrew the Filter: Use an end-cap filter wrench to loosen and remove the old spin-on canister.
  3. Prep the Surface: Wipe the engine block mounting pad completely clean with a rag.
  4. Lubricate the O-Ring: Dip your finger in clean oil and smear it generously around the new filter’s rubber gasket.
  5. Install the Filter: Thread the new filter onto the engine block securely.
  6. Refill the Crankcase: Reinstall the drain plug and pour exactly 1.25 to 1.5 quarts of fresh SAE 10W-30 oil into the engine, verifying with the dipstick.

Step 1: How Do You Remove The Old Filter And Prep The Engine Block?

Use an end-cap filter wrench to unscrew the old canister. You must physically inspect the engine block to ensure the old rubber gasket did not stick to the metal mating surface. Leaving the old seal behind is a recipe for instant engine failure.

To unscrew the spin-on filter canister, you will need the correct filter wrench size to navigate the notoriously tight Club Car engine bay. A 65mm-67mm socket-driven end-cap wrench fits perfectly over the fluted metal housing, providing leverage without crushing the thin metal. Band wrenches often lack the necessary clearance in these tight spaces.

Once the canister is off, the most vital preventative maintenance schedule compliance step is wiping down the mating surface. You must meticulously inspect the filter gasket mating surface on the engine block. If the previous filter’s o-ring tore off and remains stuck to the block, installing a new filter over it creates a “double gasket” that will forcefully blow out all your engine oil under pressure.

Step 2: How Tight Should A Club Car Oil Filter Be Installed?

To properly install a Club Car oil filter, coat the new rubber o-ring with fresh oil, thread the filter onto the engine stud until you feel the gasket make contact with the metal block, and then tighten it by hand exactly 3/4 of a turn. Never use a filter wrench to tighten it.

Adhering to the OEM assembly engineering tolerance is essential when you hand tighten three quarter turn past initial contact. You must lubricate the rubber o-ring seal with fresh oil so that it glides and compresses smoothly against the engine block pad rather than bunching up or tearing.

A common, devastating mistake DIY mechanics make is using their wrench to crank the new filter down as tightly as possible. Overtightening damages the delicate filter threads, warps the rubber gasket, and guarantees that the filter will be practically welded to the block by the next maintenance interval. Proper tactile seating maintains perfect engine lubrication pressure without risking leaks.

What Common Problems Occur After Changing A Club Car Oil Filter?

The three most common problems after changing a Club Car oil filter are:
1. Massive Oil Leaks: Caused by a “double gasket” where the old rubber o-ring stuck to the engine block.
2. Stripped Threads: Caused by overtightening the new filter with a wrench instead of hand-tightening.
3. Gas Smell in Oil: Caused by a failing fuel pump diaphragm pushing fuel into the crankcase, unrelated to the filter itself.

Master certified golf car mechanic recommendations point out that most post-maintenance failures stem from easily avoidable physical errors during installation. For example, oil leaking around the filter o-ring almost always traces back to a double gasket oil filter leak or a failure to lubricate the new seal prior to installation.

What most guides miss is that seeing a low oil pressure warning light on a Club Car immediately after a fluid change indicates a catastrophic drop in crankcase vacuum pressure. If you experience an overtightened filter leaking oil or notice a sudden drop in performance, you must shut the engine off immediately. Let’s explore the most alarming symptom owners encounter after routine service.

Why Does My Club Car Oil Smell Like Gas After Changing The Filter?

If your Club Car engine oil smells like gasoline, the oil filter is not at fault. This is caused by a ruptured diaphragm inside the mechanical fuel pump, which allows raw fuel to leak through the vacuum pulse line directly into the engine crankcase.

Many owners panic, assuming they ruined the engine during the oil change, but a Club Car fuel pump diaphragm inspection is actually what’s needed. The 2006 Club Car uses a crankcase vacuum pulse fuel pump operation. When the internal membrane tears due to age, the pulsing vacuum forcefully sucks raw gasoline down the pulse hose directly into the engine’s oil supply.

This dilution severely compromises combustion blow-by oil acidity neutralization and destroys the oil’s viscosity. Running the engine with gas-diluted oil will instantly destroy the rod bearings due to a complete lack of lubrication. If you detect this smell, you must replace the fuel pump and perform another complete oil change immediately before driving the cart again.

Frequently Asked Questions About 2006 Club Car Oil Filters

What is the difference between Club Car filter 1016467 and 103887901?

There is no functional difference between Club Car oil filter part numbers 1016467 and 103887901; the latter is simply the modernized supersession number. Club Car updated their internal catalog numbering system, but both part numbers represent the exact same Kawasaki-spec spin-on canister filter for FE290 and FE350 engines.

Does a 2006 Carryall 294 use the same oil filter as a Precedent?

No, the 2006 Club Car Carryall 294 uses a different oil filter because it is equipped with a Honda engine, not the Kawasaki engine found in the Precedent. If you own a Carryall 294 from 2004-2006, you must use a Honda-specific filter, whereas the Precedent uses the Kawasaki 1016467 filter.

How often should you change the oil filter on a Club Car?

You should change the engine oil and oil filter on a Club Car golf cart every 100 hours of operation, or at least once per year. For carts driven heavily on dusty trails or off-road, certified technicians recommend shortening this interval to every 50 hours to prevent particulate contamination.

Can I use an automotive oil filter on a Club Car golf cart?

Yes, you can safely use select automotive oil filters on a Club Car golf cart, provided they cross-reference exactly to OEM specs. The WIX 51394 and NAPA Gold 1394 are perfect examples of automotive filters that share the correct 3/4-16 thread pitch and bypass PSI required for Kawasaki engines.

What spark plug and oil filter does a 2006 Club Car take?

A 2006 Club Car takes the OEM 1016467 oil filter (or WIX 51394) and an NGK BPR6ES spark plug. Purchasing a complete tune-up kit that includes this exact spark plug, the oil filter, the inline fuel filter (1013684), and the air filter (1015426) is the most efficient maintenance strategy.

Are all Club Car gas golf cart oil filters the same?

No, Club Car gas golf cart oil filters vary heavily depending on the year and engine manufacturer. Models from 1992 to 2013 with Kawasaki OHV engines use the spin-on filter (1016467), while older flathead engines use a different setup, and newer Subaru/Kohler EFI engines require completely different filter designs.

Can an incorrect oil filter cause low oil pressure in a Club Car?

Yes, installing an incorrect oil filter can cause low oil pressure or engine failure if the bypass valve cracking pressure is wrong. If an automotive filter’s bypass valve opens too easily, unfiltered dirty oil constantly circulates; if it resists too much, oil flow to the rod bearings is dangerously restricted.

Where can I buy a 2006 Club Car oil filter locally?

You can buy equivalent oil filters for a 2006 Club Car locally at NAPA Auto Parts (NAPA 1394), O’Reilly Auto Parts (WIX 51394), or Walmart (Supertech ST4967). Using these cross-referenced part numbers ensures you can complete your maintenance without waiting for dealer shipping.

Do I need to pre-fill the oil filter on my Club Car?

Yes, you should pre-fill the new oil filter canister with a small amount of fresh 10W-30 oil before screwing it onto the engine. This process, called priming, prevents a “dry start” where the engine runs without lubrication for a few seconds while the oil pump fills the empty filter.

What size wrench do I need to remove a Club Car oil filter?

You will need a standard 65mm to 67mm end-cap filter wrench or an adjustable strap wrench to remove the Club Car oil filter. Because the Kawasaki engine bay is tight, a socket-driven end-cap wrench allows you to reach the filter easily without stripping the fluted metal housing.

Key Takeaways: 2006 Club Car Oil Filter Summary

  • Exact OEM Part Number: The factory-authorized oil filter for 2006 Club Car DS and Precedent models is part number 1016467 (recently superseded by 103887901).
  • Validated Cross References: You can safely substitute the OEM filter with a WIX 51394, NAPA Gold 1394, or Fram PH4967 at local auto parts stores.
  • Engine Oil Capacity: A full oil change with a filter replacement requires exactly 1.25 to 1.5 quarts (40-48 oz) of SAE 10W-30 motor oil.
  • Proper Installation Torque: Never tighten the spin-on filter with a wrench; hand-tighten it exactly 3/4 of a turn after the rubber gasket touches the engine block to prevent permanent leaks.
  • Preventing the Double Gasket: Always visually inspect the engine mounting pad to ensure the old rubber o-ring is fully removed before threading on the new filter.
  • Engine Specifics: These filter specifications apply exclusively to the Kawasaki FE290 and FE350 engines; the Carryall 294 with a Honda engine requires a different setup.
  • Maintenance Schedule: Replace your spin-on filter and engine oil every 100 hours of run-time or annually to maintain ideal API SJ-rated engine lubrication.

Final Thoughts on Maintaining Your 2006 Club Car Oil Filter

Maintaining a 2006 Club Car golf cart requires precise engine oil filtration to preserve the integrity of your Kawasaki engine. Whether you choose to invest in the OEM 1016467 filter from a dealer or opt for a verified WIX 51394 cross-reference at your local auto parts store, utilizing the correct specifications is absolutely non-negotiable.

Adhering to the strict 1.5-quart SAE 10W-30 oil capacity and following the golden rule of hand-tightening the canister ensures long-term, leak-free reliability. Certified small engine technicians universally agree that correct fluid maintenance is the single largest factor in maximizing Kawasaki engine longevity.

While changing the oil filter is a massive step in the right direction, it is just one component of a holistic golf cart maintenance strategy. Upgrading to a comprehensive OEM tune up kit—which includes your air filter, spark plug, and fuel filter—will keep your 2006 Club Car running powerfully on the course for years to come. What’s been your experience using cross-reference filters on your golf cart?

Follow us on PinterestFollow

Last update on 2026-11-14 / Affiliate links / Images from Amazon Product Advertising API

Share your love
Mark Crossfield
Mark Crossfield

Mark Crossfield is a UK-based golf coach, author, and YouTuber. He simplifies complex concepts, emphasizes understanding fundamentals, and has authored several golf books. Mark has helped golfers worldwide improve their game through his coaching, online content, and contributions to magazines and TV programs.